Product Description

The Frigidaire PurePour PWF-1 Replacement Water Filter is a high-quality water filtration system designed for use in Frigidaire refrigerators with the PureSource Ultra II filtration system.

This filter is engineered to remove impurities and contaminants from your refrigerator’s water and ice, providing you with fresh, clean, and healthy drinking water.

With its advanced filtration technology, the Frigidaire PurePour PWF-1 Replacement Water Filter is capable of reducing chlorine, lead, cysts, and other harmful substances from your water, ensuring that you and your family enjoy the purest and freshest water possible.

The filter has a capacity of 200 gallons or 6 months, whichever comes first, and it features a push-to-lock, slide-in design that makes it easy to install and replace.

In addition to its impressive filtration performance, the Frigidaire PurePour PWF-1 Replacement Water Filter is also certified by NSF/ANSI Standards 42 and 53 for contaminant reduction, providing you with added peace of mind about the safety and quality of your drinking water. The filter has a flow rate of 0.5 gallons per minute and can operate at temperatures ranging from 33-100°F and pressures ranging from 30-100 PSI.

Overall, the Frigidaire PurePour PWF-1 Replacement Water Filter is a reliable and effective solution for maintaining clean and safe drinking water in your home.

It is compatible with a wide range of Frigidaire refrigerator models, and it’s recommended that you replace the filter every six months to ensure that your water and ice remain fresh and pure.

From The Manufacturer

The Frigidaire PurePour PWF-1 is a replacement water filter designed for use in Frigidaire refrigerators with PureSource Ultra II filtration systems. The PWF-1 filter is capable of reducing a variety of contaminants, including chlorine, lead, and cysts, providing you with fresh and clean drinking water. The filter has a filtration capacity of 200 gallons or six months, whichever comes first, and is designed for easy push-to-lock installation.

This replacement water filter has been certified by NSF International to meet or exceed NSF/ANSI Standards 42 and 53 for contaminant reduction. It’s also been tested and certified by Frigidaire to work with their refrigerators, providing you with peace of mind that you’re using a genuine Frigidaire replacement part.

Replacing your water filter every six months ensures that you and your family have access to clean and fresh-tasting drinking water. The Frigidaire PurePour PWF-1 Replacement Water Filter is an affordable and effective solution that will help you maintain the quality of your water and ice.”

Overall, the manufacturer’s description emphasizes the filter’s ability to reduce a variety of contaminants, its certification by NSF International and Frigidaire, and the importance of regular replacement to maintain clean and fresh-tasting drinking water.

Product Information

Installation Instructions

Frigidaire PurePour PWF-1 Replacement Water Filter:

1. Locate the water filter housing in your Frigidaire refrigerator. The location may vary depending on the model, but it is usually inside the refrigerator, near the top-right corner.
2. Press the release button or tab to open the filter housing cover.
3. Remove the old water filter from the housing by pushing on the end and twisting counterclockwise.
4. Remove the protective cap from the new water filter.
5. Insert the new water filter into the housing, making sure that the arrow on the filter is pointing upwards.
6. Push the filter into the housing and turn it clockwise until it locks into place.
7. Close the filter housing cover and press until it clicks into place.
8. Run water through the dispenser for 3-5 minutes to flush the system and remove any air bubbles.
9. Reset the filter indicator light on your refrigerator if necessary. The method for resetting the light may vary depending on the model, so refer to your owner’s manual for instructions.